Simply remove the PCB as shown below, then send for programming.
If you prefer, send the complete cluster and we will do the reset..
NOTE: We no longer except just the Micro, as the unit needs to be seen working for any guarantee purposes.
There is also the danger that the Micro my be damaged through lack of Anti Static Protection.
When ordering, please state the value required in the range 000000 - 999999
Cost £60-00 + Carriage.
2nd Feb 2008:
London Taxi TX2 pre 2004 models with Trip / ODO / LCD: Made by Caermont Automotive Ltd (04/03).
These are now being programmed in-house only.
You may send the complete unit, or unsolder the LCD assembly (Five vertical connections only).
Cost £60-00 + Carriage.
Call or Email for more details.
08th Jan 2010:
Noble M12 GTO 2002 2.5 Twin Turbo. Clocks made by Caerbont Automotive Ltd
(EES5-1A32-76A)
This item may be set to Zero Miles (NEW) or any value required.
£120-00 + Carriage (In House Only at this time).
If on CDH Subs then please ask for discount.
22nd July 2009:
Neopost Post IJ-35/65 Franking Machine Cartridge 4139453E
These cartridges are set to expire 12 months from the day of installation with "CARTRIDGE EXPIRED"
just when you needed it most.
We are about to offer through a selected retailer a programmed IM340B / B74299 / 0802X that will allow these cartridges
to be re-used or refurbished. Once fitted, they may be reset each year if required, a programmer will be made available
soon for this later purpose.
Some soldering is involved unless the retailer offers a replacement service.
26th May 2009:
Read the Engraved serial number, Code and SAFE attempts from both the AC Delco CDR 500 and Delco CDR 2005
from the radios rear ISO connector block.
We used to use a P3 probe that clipped direct to the TMS 370 micro, not anymore!!!
This software is free to all CDH subscribers.
19th February 2009:
Philips French Serial Number calculator now ready.
Simply enter the serial number from the label as shown and generate the factory code for it.
EG> Enter the last four characters from the label, in this example Y117 This would generate a factory code of 1860
This software is only available to existing CDH customers or included within a new radio package @ £1495-00
Its also available as an upgrade to your current CDH package.
Those on a subscription basis will automatically receive it free via the forum.
Hour Meter made by Curtis may be reset or display the required Hours.
£60-00 + Carriage (In House Only at this time.
24th January 2009: (8th November 2009: Now covering the UK, USA IJ25/WJ-20/Frama Mail Spirit
units with options for other countries too.)
Neopost Post IJ-25 / WJ-25 & Frama Mail Spirit Franking Machine Cartridge 70401
These cartridges are set to expire 9-12 months from the day of installation with "CARTRIDGE EXPIRED"
just when you needed it most.
To purchase a new cartridge your looking at the best part of £100-00 inclusive.
CDH Are offering a programming service, or software so that you may program the cartridge yourself.
Programming service is £10 + Carriage
Software/Hardware that will allow you to program them yourself is shown here, with help screen built in.
PC Requirements: XP / Vista / Windows-7 and 1x USB port.
Please note that this service only resets the date of the cartridge so that it will continue working for a further 8-12 months.
If your a light user, then its more likely that the cartridge may work for many years, some have been reset
5 times before the actual ink runs dry.
This service does not in way interfere with post office regulations.
Download the instruction manual here. CDH-IJ-25-Manual (PDF (Adobe 5 or later required)
25 October 2008:
CAT ( Caterpillar) Hour Meter made by Curtis may be reset or display the required Hours.
£60-00 + Carriage (In House Only at this time.
8th July 2008:
CDH have built a “Stand Alone” Sony / Kenwood Remote Control for decoding those high end unit such as
M9900, CDX NC9950, MEX 5DI, CDX-M1000TF Etc.
Now, also included at no extra cost, this remote will also De-activate / Erase the Mask Key data on all D-Mask Kenwood radios too.
Simply press the re-set button on the radios front panel then....
Simply point the Remote at the radio and it will not only remove the original code, it will also put a new one in there for you... all without touching any buttons on the set or removing it from the vehicle.
Those engineers who want to test the radio/unit on the bench, then simply plug the Remote into our CDH interface and use the Remote as a fully working / functional remote control using software on the PC to drive the remote.
or purchase our USB
cable
and software for only £6.00 + carriage SonyIr
(Sony models only. Some functions may vary)
Works at a tested distance of 6 Feet.
The remote comes in its own enclosure with battery so you don't have to worry about it getting damaged in your tool box or busy work bench.
If connecting to the CDH Interface, then a cable will be required so that you can take advantage of the PC software functions.
You may also use the Windows software with USB cable available here. SonyIr
Dimensions: 95 x 60 x 25 mm
Sony/Kenwood IR Unit: (Standalone unit for code removal)
Price: £78.00
Windows Software + USB cable: (For use with PC)
Price: £6.00
Shipping: 1 - 5 Days while in stock
See the Sony Code remover here in action.
2nd January 2007:
Alpine units fitted to Chrysler vehicles now use 80-pin Motorola 9S12 secure processors.
Models such as the P05091650AB now need to have the 80-pin processor removed for programming.
We supply both programmer and 80-pin ZIF socket for programming these items... or decode them for £85-00 + carriage.
